Jump to content
Corsair Community

A7N8X Deluxe Rev 2.0 & CMX512-3200C2PT


Recommended Posts

I recently purchased two sticks of this memory. Neither of them work in my motherboard. One stick is revision 1.1, and when installed in my motherboard will only go upto 2700 speeds. 1MHz over and it doesn't post. I ran the RAM at PC2700 and decided to investigate using CPU-Z. In the SPD it states a 3200 part number for the memory but then says the RAM only goes to PC2700. Bad ram possibly?

 

The other stick is a revision 1.4, it posts at PC3200. However once it posts my system is not stable. Possible compatibility issue?

 

I was hoping to get an RMA set up for this and if at all possible cross ship a replacement.

Link to comment
Share on other sites

  • Corsair Employees
Can you tell me the CPU speed and the FSB as well that you are currently using in the system? In addition, please tell me if you have the latest BIOS installed on your system and the bios settings you have set for both CPU and memory and any performance settings that you may have set?
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...