Jump to content
Corsair Community

iCue 4.22.203 Elite Capellix LCD Screen Issue (LCD 2.6.201 firmware) FLICKERING/JITTERING!


Recommended Posts

Unfortunately like they say, if it isn't broke don't touch it! Oh look new software update, install, oh look, LCD firmware update, install.  Pump working fine but the screen is now jittering.  Do not know how to fix it.  Doesn't matter if its a GIF or still picture, temps, etc,.  See picture.  That's not a bad pic, its the screen flickering/jittering? !!! NOW WHAT? Tried reinstalling firmware (Forced) same, reinstalling, same.  How or where is the older LCD firmware to download?

 spacer.png

Link to comment
Share on other sites

I have the same issue after update too.  iCue is not tested enough.  iCue really needs to be seriously looked at.  It uses a lot of resources, crashes all the time, and usability is horrible, creating themes, knowing what and what isn't saved.

Link to comment
Share on other sites

pretty sure this applies to everyone who just updated the LCD firmware, let's not clog up the thread with "same here" posts that add nothing 😁 I've tried uninstall/reinstall, reboot, etc... nothing fixes...  going to need a hotfix from Corsair to remedy this.

Link to comment
Share on other sites

  • Corsair Employees

Completely shut the system down, turn the power supply off or unplug it from the wall for about 30sec, plug back in or turn the PSU back on, and reboot the system. See if that resolves the issue.

Link to comment
Share on other sites

28 minutes ago, Corsair Notepad said:

Completely shut the system down, turn the power supply off or unplug it from the wall for about 30sec, plug back in or turn the PSU back on, and reboot the system. See if that resolves the issue.

A shutdown doesn't help, I unplugged my PSU, left the switch on, held down the power button to drain the caps, plugged out the lcd and plugged it back in, all of it. Archon Vales is right, this needs a hotfix. The LCD pump firmware update caused this.

Link to comment
Share on other sites

Same exact issue for me.  Firmware update on LCD screen - nonstop flicker and jittering.  Tried forcing firmware on the cooler?  Nothing.  Tried reseating...nothing.  Tried power off and drain power, reseated, nothing. 

Link to comment
Share on other sites

Same issue for me. I feel like I've tried everything to fix it but nothing works. 

Link to comment
Share on other sites

After using the force update to attempt to revolve the issue I heard it disconnect and connect several time quickly and now windows shows it stopped in device manager because it isn’t functioning properly.  Obviously now iCue can’t see it anymore. Shutting down did not resolve this.    Is there a way to reset firmware externally?   How to resolve this?

Link to comment
Share on other sites

ive got a failed update for the lcd screen. is there a way to externally update?

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...