evilpc Posted June 2, 2005 Share Posted June 2, 2005 I have a pc with 2 512 sticks of matched corsair xms memory running in dual channel mode and it ran fantastic till the board died.I replaced it with the exact same board and with the same bios.When I try too boot with the ram in the dual channel configuration it won't just beeps one long beep.If I put them in the non dual channel they boot fine.I recall this being a problem but I can't remember what the solution was since it has been a couple of years since I set up the first board.Can Anyone give me a hand if you happen to remeber the work around or fix for this problem. Link to comment Share on other sites More sharing options...
CMC_SAVAGE Posted June 2, 2005 Share Posted June 2, 2005 How long ago did you replace the board? The latest BIOS for that board came out in August of last year. Link. Link to comment Share on other sites More sharing options...
evilpc Posted June 3, 2005 Author Share Posted June 3, 2005 How long ago did you replace the board? The latest BIOS for that board came out in August of last year. Link. Checked that and my bios are up to date still won"t boot if ram is inserted into the dual channel dimm slot. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted June 4, 2005 Corsair Employees Share Posted June 4, 2005 Can you tell me the exact model number of your memory module; also please tell me the exact model number of your MB along with the CPU speed and it's FSB as well? In addition please tell me what BIOS settings you have set for CPU and memory and and performance setting? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.