Tim_Thashes Posted January 27 Share Posted January 27 The LCD screen shows an error symbol, and does not show up on ICue. Is there a solution for this? Link to comment Share on other sites More sharing options...
c-attack Posted January 27 Share Posted January 27 Not a universal solution. There are a few ongoing discussions about what to try in the troubleshooting section of the forum and linked below. For most users, the first try should be to do a full PC shutdown, flip the PSU switch off, wait 10-15 seconds, and then flip back on and boot normally. This will force the LCD top and Commander Core to reset. However, AMD owners still have the usual USB detection issues and using the splitter doubles the traffic on the line. If you have another motherboard internal USB 2 port to spare, try connecting the LCD top directly to the board. https://forum.corsair.com/forums/topic/173083-icue-417244-elite-capellix-lcd-screen-issue/ https://forum.corsair.com/forums/topic/175436-h150i-lcd-no-screen-setup-tab-when-using-alongside-commander-xt/#comment-1010113 Link to comment Share on other sites More sharing options...
Jacotey Posted April 15 Share Posted April 15 On 1/27/2022 at 6:35 PM, c-attack said: Not a universal solution. There are a few ongoing discussions about what to try in the troubleshooting section of the forum and linked below. For most users, the first try should be to do a full PC shutdown, flip the PSU switch off, wait 10-15 seconds, and then flip back on and boot normally. This will force the LCD top and Commander Core to reset. However, AMD owners still have the usual USB detection issues and using the splitter doubles the traffic on the line. If you have another motherboard internal USB 2 port to spare, try connecting the LCD top directly to the board. https://forum.corsair.com/forums/topic/173083-icue-417244-elite-capellix-lcd-screen-issue/ https://forum.corsair.com/forums/topic/175436-h150i-lcd-no-screen-setup-tab-when-using-alongside-commander-xt/#comment-1010113 Thank you the full PC shut down solution worked, often the simplest solution works. Link to comment Share on other sites More sharing options...
Ig83 Posted June 21 Share Posted June 21 So i just bought the h150i elite lcd and right after installing it, it only shows the red triangle and it does not show up on iCUE, i have tried everything i can think of and have gone over what i see alot of ppl say online. Is there any fix anyone knows for sure will fix it? pls help. Link to comment Share on other sites More sharing options...
c-attack Posted June 21 Share Posted June 21 Better to ask here with more current discussion. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now