Sonic_912 Posted May 27, 2005 Share Posted May 27, 2005 hello, my problem: i only could set the memory frequency to 83% >> 366mhz. At 400 windows will shout down after a few minutes.... I found another thread about it, but no solution.... my system: amd 3000+ 400FSB asus a7n8x deluxe 2.0 2x corsair vs512mb400 thx for any help !!! Link to comment Share on other sites More sharing options...
Yellowbeard Posted May 27, 2005 Share Posted May 27, 2005 I realize that you don't have the exact same setup but, several threads at The House of MOBOs have really helped some people with their A7N8X MOBOs. You may have some luck there. The sticky thread by Jabberwok is very good. Mike. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted May 27, 2005 Corsair Employees Share Posted May 27, 2005 Please test the modules one at a time with http://www.memtest.org and I would set the Dim Voltage to 2.7 Volts as well. If you do find one failing then lets get it or them replaced. Please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! However; if you get errors with both modules, that would suggest some other problem. And I would try testing the memory in another system to be sure. Link to comment Share on other sites More sharing options...
Sonic_912 Posted May 28, 2005 Author Share Posted May 28, 2005 thanx for your help... :D: I followed the instructions from jabberwok... all user definied 3 - 3 - 8 - 2,5 now memtest just found one error(in test #8) in three passes of the test... but windows isn´t stable....after a few minutes playing painkiller e.g., the blue screen appears > "page_fault_in_nonpage_area" should i reinstall windows ? I also set the FSB to 398mhz, but still the same problem... Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted June 1, 2005 Corsair Employees Share Posted June 1, 2005 Did you test the modules one at a time? And did you get any errors with either of the modules or was it the same error with both modules? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.