dhc0329 Posted May 26, 2005 Share Posted May 26, 2005 Is it okay to set at? 400MHz 2-3-3-6 2.775 V I am running Intel 875PBZ w/ P4 3.2E. So far, the system has been running stable. The reason I am asking is that default setting programmed on these chips were at 3-3-3-8 in the Bios. Thanks. Dan Link to comment Share on other sites More sharing options...
Wired Posted May 26, 2005 Share Posted May 26, 2005 2-3-3-6 on ARE the correct settings. Link to comment Share on other sites More sharing options...
dhc0329 Posted May 26, 2005 Author Share Posted May 26, 2005 Thanks for your confirmation! Now if I can ask one more question, does the system consume more power using 4 x 512 (taking all slot) versus using just 2 x 1024 chip? I heard 48 watt is used when all 4 slots are filled, would it be different if I only fill two slots with 2 x 1024 chip? Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted May 26, 2005 Corsair Employees Share Posted May 26, 2005 Yes, about 12 watts per modules and the density does not matter. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.