Jump to content
Corsair Community

My Ram doens't work. RAM request.


ierun

Recommended Posts

Hi, I just bought Cosair VS512MB400 PC3200 512MB 64Mx64 184 DIMM RAM.

however, it doens't work at all....therefore, i tired other company ram , and it just works good.....

My other parts are just good....

i'm 100% sure that this Corsair ram has a problem..

 

my computer specs are:

 

CPU AMD 64 |3200+

MB|MSI K8N NEO4 PLATINUM SLI

DDRAM512MB CORSAR64X64 VS512MB400 RAM (This one has problem)

VGA SAPHIRE|X300SE 128 MB GRAPHIC CARD.

HD 120GB|SAMSUNG SP1213C 8MB

SAMSUNG CMBO 52x32x52x16|SMSG TS-H492A/WBEH

 

 

Please give me a replay as soon as possible..

and i wish to have a RMA number so i can request warranty.

Link to comment
Share on other sites

  • Corsair Employees

Please make sure that you have the latest bios and then set the Dim Voltage to 2.7 Volts and test the modules one at a time with http://www.memtest.org. if you do find one failing then lets get it or them replaced. Please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it!

However; if you get errors with both modules, that would suggest some other problem. And I would try testing the memory in another system to be sure.

Link to comment
Share on other sites

Hi! thank you for answering fast.

 

I am pretty sure that the ram I have is problem because I have only one ram stick.

I tried testing other parts replaced but nothing worked.

 

Finally, I tried the other company's ram purchased to test from BESTBUY worked fine without putting the ram(Corsair one) then I could start the computer fine.

 

However, if I put the this corsair ram alone, as soon as the computer is on, it does not process and turned off, or make noisy beeping sound. I cannot even get to the bios.

 

so...can I return it and get it replaced?

 

Please give me a replay as soon as possible..

Thank you~!

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...