Jump to content
Corsair Community

Corsair H150i Elite LCD + comander xt - lighting problem


pawelm
 Share

Recommended Posts

Hi, i have problem with fans lighting. 
I have h150i elite lcd + commander xt + 3x ML fans on aio + 1 LL fan

When icue is on fans lighting doesn't work (sometimes LL fan light a bit) but when I close icue, hardware lighting works and every fan light up.

i have iCue ver. 4.18.209

Anyone had such a problem and found a solution?

268495294_1924686721066635_109031941305746101_n.thumb.jpg.23299a3732f890eaabef109f67f6a2f6.jpg269451287_998534390731717_7301936923919546181_n.thumb.jpg.44b5a2bf67a88bba6ff5f46dec40d8af.jpg

Link to comment
Share on other sites

Did you by chance manually set your Lighting Setup to “8 LED series X 4 fans”?  You have 3x8 LED fans on the front (ML-Elite OEM), but the rear LL is 16. It happens to be half lit. 
 

If the auto-detect RGB is not working correctly, try a manual setting of 8 LED fan X 5. That will make the rear fan a combination of two 8 led fans. 

Link to comment
Share on other sites

4 hours ago, c-attack said:

If the auto-detect RGB is not working correctly, try a manual setting of 8 LED fan X 5. That will make the rear fan a combination of two 8 led fans. 

I tried these manual settings but unfortunately it did not help 😞

I wonder why when I turn off the icue the fans are lighting up.

and I will add that not only the fans do not light up, but also the ring on the display.

Link to comment
Share on other sites

When you quit CUE, you drop into "hardware lighting mode".  These are more basic color schemes that can be saved to the device and run outside the software environment.  They apply to all fans on a controller equally and that is what paints this as a configuration issue within your software lighting set-up.  If there was a bad LED or connection, the fans would show the same behavior at all times or be very erratic.  

 

Can you show us the Lighting Set-up screen for the Commander Core?

Link to comment
Share on other sites

133854872_LIGHTINGSETUP.thumb.jpg.1b561d1162883bf85b7fd546bffa918d.jpg

Link to comment
Share on other sites

I do not have ideas about what to do. I disconnect LL fan from commander but still nothing, I disconnect every fan and connect one by one and nothing. I try different usb ports on mobo. it looks like there is no data flow between icue and commander. on icue i see changes but they do not show up on fans. one thing I can do is screen setup.

Link to comment
Share on other sites

  • 2 weeks later...

finally, I got a new set and it works as it should 🙂

in previous aio commander was broken

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...