Jump to content
Corsair Community

H60 AIO White LED


CreamSauce
 Share

Recommended Posts

Hey guys, I'm sure this has been asked before however I only saw post about people wanting to turn off the white led around the pump. mine however is not turning on. from what I read the Hydro series H60 is not compatible with ICUE. I have connected plugged into the CPU Fan header. should it be connected else where? LED CPU maybe?*  thank you for any advice.  

Link to comment
Share on other sites

That SATA connector needs to be connected to a corresponding end on one of your PSU SATA cables (likely along with some HDD/SSDs). That’s pump and lighting power. If you have pump speed but no lighting, something is wrong and you should contact Corsair Support or exchange the unit. 

Link to comment
Share on other sites

Maybe we'd better make sure you have the H60 (2018).  It is reviewed in this article with lots of pictures, including the SATA connector (3rd pic from top).  If you have the original 2012 version, there is no LED and just a 3 pin connector for power.

Link to comment
Share on other sites

There's a part number on one of the short sides of the radiator. What is it? That'll tell you exactly which cooler you have.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...