Crisao23 Posted May 23, 2005 Share Posted May 23, 2005 What would be the best settings for FX55 + TWINX1024-4400C25 ? I got here a FX55 and I would like to test the system with TWINX1024-4400C25. Link to comment Share on other sites More sharing options...
Yellowbeard Posted May 23, 2005 Share Posted May 23, 2005 Are you OCing the CPU and will you be running 1:1 or asynch? For stock speeds on the RAM (DDR550) set the latencies manually to 2.5,4,4,8. If you decide to run at 1:1 at 200mhz stock CPU speed (DDR400) you may have a good chance of running as low as 2,3,3,5 or 2,3,3,6 or 2.5,3,3,7. You will just have to experiment some. At either setting, I would suggest 2.7v - 2.8v Vdimm. Mike. Link to comment Share on other sites More sharing options...
Crisao23 Posted May 23, 2005 Author Share Posted May 23, 2005 any chance to run asynch on asus a8n-sli deluxe ? Link to comment Share on other sites More sharing options...
Yellowbeard Posted May 23, 2005 Share Posted May 23, 2005 I have not laid hands on one and I have not seen the bios yet. However, I'd be shocked if you could not run asynch. However, in the past, asynch on AMD platforms was a BAD idea. Mike. Link to comment Share on other sites More sharing options...
Wired Posted May 24, 2005 Share Posted May 24, 2005 Still is IIRC. Also, if you're running SLI, I believe CPUs OC less due to the stress. Could be wrong though, not up to date on SLI stuff. Link to comment Share on other sites More sharing options...
high5 Posted May 24, 2005 Share Posted May 24, 2005 nothing is lost when running 'asynch' on k8. in fact, k8 architecute has no such thing as 'synch' cpu mem clock. memory speed is now derivative of the cpu speed itself, not the 'fsb', b/c k8 has no fsb... take a look at cpu-z memory tab. so, when overclocking, its advisable to drop mem divider in order to reach higher htt speeds. Link to comment Share on other sites More sharing options...
Crisao23 Posted May 25, 2005 Author Share Posted May 25, 2005 The idea was to use the processor at default (it overclocks like a monster.. but I'll wait til I need it) and memory at 550. Does anyone runs it at these speeds on this particular mobo (A8N-SLI Deluxe) ? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.