High Memory Usage

[Swarthyy]

I think Corsair.Service have very high memory usage. What can I do?

[nopenopenope2]

That seems off. Mine uses 220-250mb. Maybe try to re-install to the latest version?

[c-attack]

That usually means it’s entangled with another service. Be careful using some motherboard RGB programs and other full spectrum monitoring apps like AIDA or HWiNFO also can cause this (along with bad or missing system data). See if any of those apply and then I would probably run a repair install of cue from the Windows/settings/apps list to verify the installation. 

[nopenopenope2]

Thanks c-attack. Already removed everything and done specific installs of mobo drivers etc.

Did notice a conflict between HWINFO64, but it's good to have it confirmed that's the actual cause as it wasn't happening on launch.

Will give it a try. Thank you for the help 🙂 I'll report back if I find anything. Might be helpful for other users.

[c-attack]

You can get it to work if you disable HWiNFO's monitoring of any Corsair internal devices (Commander Pro/Core/XT, PSU, etc.).  I usually don't have a problem with RAM temps, but that is a possible conflict as well.  External peripherals and ambient lighting do not matter.  Right click on the device name in HWiNFO and it should give you an option to disable monitoring.  I also recommend using the portable version vs the installer package.  Other users say they have no problems with the installed package, but every now and then someone turns up with a deep lying conflict.  

[Swarthyy]

Guys I just clicked ''End Task'' and my problem is solved. Tysm for helping.