H150I Elite LCD Screen Options Gone from ICUE after Update

[Gogfot]

So my
ICUE software is version 4.18.209
H150I Elite LCD is 2.6.201

I updated the lcd cooler as well as my keyboard. But after the update there was an issue some red warning symbol appearing every few on the lcd screen and eventually it went away to my normal gif. Great I thought, until I realized I couldn't change it to anything else because "Screen Setup" and "Hardware Screen" options were GONE from Icue.

Also as you can see in the image, (I get this screen when i select "Ring" , it shows that the lcd screen should be displaying the temps of the pump and cpu BUT instead I see the gif when I look at it.

Anyone have any suggestions/ideas to fix this? 

[Dr4cul]

Same Problem. 😂

[Reignowner]

Same here guys, what should we do? Any solution?

 

[Reignowner]

On 12/23/2021 at 2:10 AM, Gogfot said:

So my
ICUE software is version 4.18.209
H150I Elite LCD is 2.6.201

I updated the lcd cooler as well as my keyboard. But after the update there was an issue some red warning symbol appearing every few on the lcd screen and eventually it went away to my normal gif. Great I thought, until I realized I couldn't change it to anything else because "Screen Setup" and "Hardware Screen" options were GONE from Icue.

Also as you can see in the image, (I get this screen when i select "Ring" , it shows that the lcd screen should be displaying the temps of the pump and cpu BUT instead I see the gif when I look at it.

Anyone have any suggestions/ideas to fix this? 

On 12/23/2021 at 2:10 AM, Gogfot said:

I fixed the problem by shutting off the pc, flip over the psu button on/off, and boot again. Does it work for u?

 

 

Edited December 24, 2021 by Reignowner

[Dr4cul]

 Iam little disappointed that no support staff is reading along here and writing anything about it at all, 
that's really weak of such a large company as Corsair
1 week has now passed....

 

but that's okay, we're only customers 🙂

[c-attack]

7 hours ago, Dr4cul said:

Iam little disappointed

This is a user forum. Corsair Support is accessed through the main website and is private correspondence with tech support. 
 

The above issue is what happens when the LCD top is not properly detected on boot/CUE launch. There are numerous others threads pre-dating this one discussing the issue and possible steps to try. Most titles with “LCD” will have some discussion. 

[Agreeableend]

On 12/24/2021 at 11:14 AM, Reignowner said:

I fixed the problem by shutting off the pc, flip over the psu button on/off, and boot again. Does it work for u?

I uninstalled armourycrate and did that and it was fixed when i started so i dont know which fixed it. Thanks anyways