newbiezzz Posted May 22, 2005 Share Posted May 22, 2005 Hi Ram Guy Just wondering whether there's some compatibility issues on the setup i'm having trouble getting my UTT to run at 200mhz 2-2-2-5 even with 3.2v memtest runs fine.. no errors at all but windows gave me BSOD i thought it'll give in when i do some burning in.. but i still can't get it to boot windows with 200mhz 2-2-2-5 any suggestion on this RAM GUY? thnx heaps Link to comment Share on other sites More sharing options...
seamuso Posted May 22, 2005 Share Posted May 22, 2005 read this dfi forum thread ... the 5/10 beta bios might help with your problems Link to comment Share on other sites More sharing options...
Wired Posted May 22, 2005 Share Posted May 22, 2005 i'm having trouble getting my UTT to run at 200mhz 2-2-2-5 even with 3.2v 1. Ram Guy doesn't check this forum. 2. 3.2 v voids the warranty 3. They're only tested @ 2(2.5)-3-3-6, no guarantee they'll do 2-2-2-5. Link to comment Share on other sites More sharing options...
newbiezzz Posted May 23, 2005 Author Share Posted May 23, 2005 i know it voids the warranty.. isn't this the enthusiasts only area? i know there's no guarantee doing 2-2-2-5.. but i've trouble getting it to do 2-3-3-6 as well.. Link to comment Share on other sites More sharing options...
Wired Posted May 23, 2005 Share Posted May 23, 2005 What's your full specs? Link to comment Share on other sites More sharing options...
newbiezzz Posted May 23, 2005 Author Share Posted May 23, 2005 dfi nf4 sli-d bios 414-3 modstream 520w 3500+ newcastle 6800GT 160gb seagate ncq sata drive xp90 corsair 3200c2v1.5 2x512mb Link to comment Share on other sites More sharing options...
Wired Posted May 23, 2005 Share Posted May 23, 2005 Try 2.5-3-3-6 (only 2 on Intel). Link to comment Share on other sites More sharing options...
newbiezzz Posted May 23, 2005 Author Share Posted May 23, 2005 Try 2.5-3-3-6 (only 2 on Intel). will give it a go Link to comment Share on other sites More sharing options...
Devils_Hitman Posted May 24, 2005 Share Posted May 24, 2005 Hey newbiezzz, here are my current settings with my twinx3200c2 v1.5 and DFI ultra-d, N4D414-2 bios, A64 3000 CBBID winchester @ 2024mhz 1.36v - 225htt - ram @ 225 , 2-2-2-7, 2.9v A64 Tweaker settings, tcl - 2.0 trc - 13 trfc - 15 trcd - 2 trrd - 2 tras - 7 trp - 2 twr - 3 twtr - 2 trtw - 4 tref - 200mhz 3.9us twcl - 1clk dqs Skew mode - off dqs skew - 0 r/w Queue Bypass - 16x controller mode - 128bit ecc - off 2t timing - disable bypass max - 7x Max Async - 6ns Read Preamble - 5.0ns Idle Cycle limit - 256clks Dynamic Idle Conter - disable dll - enable drive strengh - weak 32 byte - Disable Bank interleave - Enabled It passes OCCT and S&M memory benchmarks fine. Im going to test more when I get my new powersupply, I'll get the results soon. Give those settings a try, let me know how they work out. Link to comment Share on other sites More sharing options...
Yellowbeard Posted May 24, 2005 Share Posted May 24, 2005 dfi nf4 sli-d bios 414-3 modstream 520w 3500+ newcastle 6800GT 160gb seagate ncq sata drive xp90 corsair 3200c2v1.5 2x512mb Some of these issues with the DFI MOBOs are being addressed by DFI with the new beta bios'. The bios you listed, 414-3, is it the most recent beta? I have been seeing posts about this will many different brands of RAM other than Corsair so the bios may help you if you don't already have it. Mike. EDIT: Seamuso beat me to it, sorry for the redundancy, Seamuso beat me to it, sorry for the redundancy, Seamuso beat me to it, sorry for the redundancy.................. :confused: Link to comment Share on other sites More sharing options...
pershoot Posted June 15, 2005 Share Posted June 15, 2005 Hi Ram Guy Just wondering whether there's some compatibility issues on the setup i'm having trouble getting my UTT to run at 200mhz 2-2-2-5 even with 3.2v memtest runs fine.. no errors at all but windows gave me BSOD i thought it'll give in when i do some burning in.. but i still can't get it to boot windows with 200mhz 2-2-2-5 any suggestion on this RAM GUY? thnx heaps pls list your GENIE DRAM, from left to right, config of your sticks (yellow/orange), and bios your currently using, whether they are UTT CH or UTT BH, and lets see if we cant get you 1.5/2-2-2 to 250:) Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.