LL120 White RGB not working

[Nishikyso]

Hi guys, I have the Corsair 680x with the three LL120 rgb coolers, all coolers ever working good and RGB too, but I decided to buy three coolers more for complete the RGB Hub, now this three coolers are the White edition (better specs).

Yesterday when I put the new coolers, I just replace the "1, 2, 3" RGB Cables for "4, 5, 6" and the new coolers on "1, 2 ,3" thats all xD All coolers was working, was cooling, but just one coolers had the RGB on (the "1", a new cooler). 

Today I change the 1, 2 ,3 (the new coolers) for 4, 5 and 6, and the old coolers now are in 1, 2, 3. Now, all coolers are cooling too, but just the RGB from the old coolers are working (1, 2, 3). I dont know why, and I dont know what I have to do. 

Specs
Mother MSI Z490 MPG Gaming Plus
Windows 10, iCUE v4 (the last version)
Corsair 680x complete, with Commander Pro and Lighting Node Pro.
PSU Evga 80+ 750w Gold GQ

The SATA Cable is connected, I didn't change nothing when I put the coolers, just some screws for the coolers and change the cables for the Lighting Node Pro.

Sorry for my English, Im from Argentina. 

[c-attack]

The Commander Pro and Lighting Node Pro do not auto-detect your fan type and number.  You need to specify this in the software in the "Lighting Set-up" tab.  Make sure it is set to "LL Fans" x 6 to generate the LEDs for all the fans.  You should also then see 6 fans in the Lighting Effects UI.  

 

If that does not solve it, you will need to show us your Lighting Effects screen.