Danny805 Posted December 6, 2021 Share Posted December 6, 2021 so i need help with my sp120 rgb elites i cant get the leds to work properly i have been on this issue for 3 days i have the usb to my mother board i have the sata to a sata cable on my psu fans work but only one led works and i cant cotrol the color but i can turn it off please help my current motherboard is a z590 auros master Link to comment Share on other sites More sharing options...
c-attack Posted December 6, 2021 Share Posted December 6, 2021 You will need to test each fan by itself in RGB slot 1 on the controller. It’s a series circuit so if LED#7 on fan 1 is bad, then everything after is dark or sometimes scrambled. If the other two fans currently in slots 2 and 3 light up when in slot 1, that suggests fan 1 is the problem. Link to comment Share on other sites More sharing options...
Danny805 Posted December 6, 2021 Author Share Posted December 6, 2021 i only have 2 so are you saying i should more or less switch them around? Link to comment Share on other sites More sharing options...
Danny805 Posted December 6, 2021 Author Share Posted December 6, 2021 so i switch them both around the other one works in port 1 it seems nothing carries over into port 2 Link to comment Share on other sites More sharing options...
c-attack Posted December 6, 2021 Share Posted December 6, 2021 This suggests the fan now in #2 has a defect in the LED string — probably right at led #1. Contact support for a replacement or if brand new check out your retail exchange options. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now