ICue no longer recognizes my k95 Platinum XT because of a new USB switch I installed. How can I make all my keys green all the time?

[justwantgreen]

I needed to install a new usb switch to be able to swap keyboard/mouse to and from work laptop. But now ICue doesn't recognize my keyboard because its going through this switch.  I just want my keys to be solid green all the time. How can I do this?

Is there a keyboard shortcut to switch to green?

Is there someway to save a profile directly to my keyboard?

The color schemes available to me now are just the defaults, which are all swirling/changing colors. 

[c-attack]

If the KB can't communicate with the software, then you are in 'hardware mode'.  You will need to connect the KB to the PC normally so it shows in CUE, then set a static color green (or whatever) to the keys in the HW Lighting tab.  Then go to device settings and save it to one of onboard slots.  You may need to use the profile button to rotate around to it if that number is not the current HW Lighting.  You'll find that out on the next boot or by quitting the software.  

[justwantgreen]

1 hour ago, c-attack said:

If the KB can't communicate with the software, then you are in 'hardware mode'.  You will need to connect the KB to the PC normally so it shows in CUE, then set a static color green (or whatever) to the keys in the HW Lighting tab.  Then go to device settings and save it to one of onboard slots.  You may need to use the profile button to rotate around to it if that number is not the current HW Lighting.  You'll find that out on the next boot or by quitting the software.  

Issue resolved, thank you!