demonbrother666 Posted May 21, 2005 Share Posted May 21, 2005 whenever i plug my second stick of RAM into the daul channel slot, my comp. starts acting totally, weird and i get an "application error", when i take it out of the dual channel mode the computer works fine, any one else had this problem, i checked w/ the ram guy to make sure the ram was campatible. any suggestions? thanks erik :cool: my system components: WD raptor wd740gd 73 gb serial ata150 AMD athlon 64 fx53 sledhammer socket 939 Corsair valueselect 1 gb 184 pin ddr sdram ddr 400 (pc 3200) unbuffered model vs1gb400c3 X2 soltek sl-k8tpro-939 soket 939 via k8t800pro atx amd motherboard running window xp media center Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted May 21, 2005 Corsair Employees Share Posted May 21, 2005 Please test the modules one at time with http://www.memtest.org and lets make sure one is not failing and I would set the Dim Voltage to 2.7 Volts as well. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.