SPS120 PRO isn't working

[Zura_p]

Hello,

 

I recently bought SP120 PRO fans for my PC for better cooling and I first plugged in to the Case controller. They lighted up but just white. but the six of them were lighted up. After I changed to the RGB hub that was on the box. but to my surprise the RGB hub just recognizes the first fan, even though I set it up with 3 fans (the new ones) and still doesn't recognize the other two. I'm asking because I do not know if I did something wrong or it is the RGB hub issue so I can return it and exchange it at least.

PD: fans are working properly, the RGB seems like the trouble 

[c-attack]

Are all 6 fans SP-Pro?  Or do you have 3 older SP-RGB fans mixed in there?

[Mark_T]

2 hours ago, Zura_p said:

... but to my surprise the RGB hub just recognizes the first fan, even though I set it up with 3 fans (the new ones) and still doesn't recognize the other two.

Have you left a gap when plugging them in?

With 3 fans they should be plugged into the ports labelled 1,2,3 on the Lighting Node Core.

Also make sure you set it for 3 fans and the correct type in the iCue software.

Edited November 27, 2021 by Mark_T

[Zura_p]

those are 3 SP and the other 3 are SP Pro

[c-attack]

13 hours ago, Zura_p said:

 

those are 3 SP and the other 3 are SP Pro

 

That is the problem. The original “SP-RGB” are not compatible with any other fan type. Those two would need to be on separate controllers. Also the SP-RGB is 4 LEDs and the Pro 8 further complicating using them together — or any other fan with a different led count.