Anthony-xxx Posted May 20, 2005 Share Posted May 20, 2005 I have bought 2 modules of memory CORSAIR (VALUESELECT VS256MB333) in configuration dual-cannel,but when I execute a program or a game 3D that it demands memory the PC goes in reset. The same thing happens even if use a single module.According to your situated these modules they are compatible with mine motherbord (Chaintech 7NIF2).On site (http://www.Chaintech.com.tw).I have seen as modules RAM can be used until 333Mhz using the integrated VGA. You can help me please? :[pouts: Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted May 20, 2005 Corsair Employees Share Posted May 20, 2005 Please test the modules one at a time with http://www.memtest.org and I would set the Dim Voltage to 2.7 Volts as well. In addition, when you run memtest please check that the modules are running at DDR333 and at Cass 2.5-3-3-7. Link to comment Share on other sites More sharing options...
Anthony-xxx Posted May 23, 2005 Author Share Posted May 23, 2005 The test has not found errors,I have update my BIOS of my PC hour work correctly.I can add an other RAM (DDR 300Mhz Timing 2,5-3-3-7) of marks various to the two Corsair modules :confused: ? Thanks. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted May 23, 2005 Corsair Employees Share Posted May 23, 2005 If you install 3 modules the CPU white papers suggest DDR200, but you can try it and see. In addition, all 3 of the modules would need to be exactly matched. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.