Jump to content
Corsair Community

One faulty address


EEtje

Recommended Posts

In january 2004 I bought a TWINX1024-3200C2PT memory set. Everything worked well, until some weeks ago. I suspected it had to do something with my memory, so I ran the memtest program. Several times per individual test it records an error on address 0002be23a20; it seems the fifth hexadecimal digit is stuck on "7". I took out the corresponding module and now everything seems to be fine. I didn't change any BIOS settings, and the other module works perfectly.

 

The other system specs:

 

DFI Lanparty NFII Ultra B

Athlon XP 2800+ (Barton)

Radeon 9800Pro

Some harddisks, cd/dvd drives,

a 550W PSU and enough

cooling for a nucleair reactor.

 

What should I do?

 

<edit> My retailer can't help me because their warranty period of one year has passed. </edit>

 

Thanks in advance,

EEtje

Link to comment
Share on other sites

Here are the settings according to cpuz:

 

 

Number of CPUs 1

Name AMD Athlon XP

Code name Barton

Specification AMD Athlon XP 2800+

Family/Model/Stepping 6A0

Extended Family/Model 7/A

Package Socket A

Technology 0.13µ

Instructions Sets MMX, Extended MMX, 3DNow!, Extended 3DNow!, SSE

Clock Speed 2088.0 MHz

Clock multiplier x12.5

Front Side Bus Frequency 167.0 MHz

Bus Speed 334.1 MHz

P-Rating 2800+

L1 Data Cache 64 KBytes, 2-way set associative, 64 Bytes line size

L1 Instruction Cache 64 KBytes, 2-way set associative, 64 Bytes line size

L2 Cache 512 KBytes, 16-way set associative, 64 Bytes line size

L2 Speed 2088.0 MHz (Full)

L2 Location On Chip

L2 Data Prefetch Logic yes

L2 Bus Width 64 bits

 

 

Chipset

------------------------------------------------------------------------------

 

Northbridge nVidia nForce2 Ultra 400 rev. C1

Southbridge nVidia nForce2 MCP-T rev. A4

Graphic Interface AGP

AGP Revision 3.0

AGP Transfert Rate 8x

AGP SBA supported, enabled

AGP Aperture 128 MBytes

Memory Type DDR

Memory Size 512 MBytes

Memory Frequency 167.0 MHz (1:1)

CAS# 2.0

RAS# to CAS# 3

RAS# Precharge 2

Cycle Time (tRAS) 6

 

Memory SPD

------------------------------------------------------------------------------

 

DIMM #2

 

General

Memory type DDR-SDRAM

Manufacturer (ID) Corsair (7F7F9E0000000000)

Size 512 MBytes

Max bandwidth PC3200 (200 MHz)

Part number CMX512-3200C2

Manufacturing date Week 00/Year 00

 

Attributes

Number of banks 2

Data width 64 bits

Correction None

Registered no

Buffered no

 

Timings table

Frequency (MHz) 166 200

CAS# 2.0 2.5

RAS# to CAS# delay 3 3

RAS# Precharge 3 3

TRAS# 7 8

 

 

I already removed the second (faulty) module which was in DIMM #3, and was operating under exactly the same settings.

Link to comment
Share on other sites

  • Corsair Employees

Please test the modules one at a time with http://www.memtest.org and I would set the Dim Voltage to 2.7 Volts as well. If you do find one failing then lets get it or them replaced. Please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it!

However; if you get errors with both modules, that would suggest some other problem. And I would try testing the memory in another system to be sure.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...