Jump to content
Corsair Community

How to program Corsair One Pro A200 LEDs


Recommended Posts

Currently, I have the 8 LEDs programmed to change color based on CPU temperature, as shown below:

image.thumb.png.011647e4f8babfae8dce89f1ff7350bb.png

I would like to program each LED individually. For example, LED 1 for CPU temperature, LED 2 for GPU temperature, LED3 for SSD temperature, etc. Can someone please explain how I can do that with iCUE?

Link to comment
Share on other sites

I have figured it out. This is what I have done:

1. Have 5 layers of temperature lighting types.

2. For each layer, create a "Quick Lighting Zone" by selecting the corresponding LED(s), the sensor, and the color temperature range.

As a result, I have the following color scheme:

1. LEDs 1 and 5 correspond to CPU temp.

2. LEDs 2 and 6 correspond to GPU temp.

3. LEDs 3 and 7 correspond to SSD temp.

4. LED 4 corresponds to CPU coolant temp.

5. LED 8 corresponds to GPU coolant temp.

image.thumb.png.bc781d79b25d2df44d22a768e1af36a1.png

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...