Corsair Vengheance RGB PRO - lighting

[b1ackbyte]

I have a question regarding the "CMW16GX4M2K4000C19". I have two kits installed an both have one bright one and one slightly yellowish-one. (see photo) - In real its much more visible...!.

I like my new clean white build, but i dont like that the white is not matching properly. Two out of 4 DIMMS. (#FFFFFF) FTW.

Through Thaiphoon Burner i checked the detials of my ram and it seems, that the two with worse lighting have Sensors build-in of STMicroelectronics.

 

DIMM 1, 3

THERMAL SENSOR 
Manufacturer: ABLIC Inc. 
Model: S-34TS04A 
Revision: 21h 
Sensor Status: Enabled 
EVENT Output Control: Disabled 
Temperature Accuracy: B-Grade 
Temperature Resolution: 0,2500 °C (10-bit ADC) 
Current Temperature: 51,500 °C / 124,700 °F 
Negative Measurements: Supported 
Interrupt Capability: Supported 
10V of VHV on A0 pin: Supported 

DIMM 2, 4

THERMAL SENSOR 
Manufacturer: STMicroelectronics 
Model: STTS2004 
Revision: 01h 
Sensor Status: Enabled 
EVENT Output Control: Disabled 
Temperature Accuracy: B-Grade 
Temperature Resolution: 0,2500 °C (10-bit ADC) 
Current Temperature: 53,750 °C / 128,750 °F 
Negative Measurements: Supported 
Interrupt Capability: Supported 
10V of VHV on A0 pin: Supported

 

Is there a quick solution or do i have to return the ram?

 

Thanks in advance!

B1

[b1ackbyte]

KIT 1

Dimm 1 bright white

Dimm 2 slightly yellowish

KIT 2

Dimm 3 bright white

Dimm 4 slightly yellowish