Jump to content
Corsair Community

Lighting Node Pro or Individual Components??


LarrySinNJ
 Share

Recommended Posts

I have a Lighting Node Pro controlling four Corsair LED strips and two LL120 Fans.  Some of the LEDs in both the fans and the strips don't follow the iCue program, i.e. with the Corsair One blue program, some of the LEDs on the LED strips are purple and one is orange.  The fans should be static blue, but one is flashing various colors.

Link to comment
Share on other sites

You may an issue with one or more of the strips/fans. It’s a series circuit and sometimes it’s very obvious when there is a problem — the lights stop right there. However, incorrect colors and flickers are also sign of failing red, green, or blue LEDs.
 

Try the fans one at a time in slot 1 on the RGB hub. Since you only have 2, this is straightforward and #2 will work or not in slot 1. For the strips you’ll need to connect them 1 at a time to find the bad strip. 
 

In CUE you can create a new scene, static white. That should help show if one of the color LEDs is off vs a blown circuit pathway where you get no lights. 

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...