DaLawman Posted May 15, 2005 Share Posted May 15, 2005 I have a MSI K8T NEO2-F motherboard with an AMD socket 939 3000+ venice. I attempted to install Corsair Value Select 2x512 DDR 400 Dimms (VS1GBKKIT400). If only one dimm is installed the system boots fine. If both dimms are installed the system will not boot. It wont even bring up the monitor. I updated the bios to 3.3 and it still wont work. I have tried them in slots 2-4,1-3, and so forth with no success. Any help? :confused: Link to comment Share on other sites More sharing options...
Yellowbeard Posted May 16, 2005 Share Posted May 16, 2005 I'd suggest that you run Memtest on each module individually. Also, I'd suggest that you raise the DIMM voltage to about 2.7v - 2.8v . Mike. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.