Jump to content
Corsair Community

Sub-Par TWINX1024-4400C25 needs RMA


Recommended Posts

I have a MSI K8N Neo2 Platinum. I have been very happy with my first set of TWINX1024-4400C25. The set operates fine at 2.5-4-4-8 275 MHz 2.75v (and 2.5-3-3-6 250 MHz 2.75v; 2.5-3-3-6 220 MHz 2.7v; and 2-2-2-5 200 MHz 2.7v).

 

I have bought a new set for another machine I want to build and have tested them in the Neo2. The new set will not pass Memtest at any of the above timings. The errors for 2.5-4-4-8 275 MHz 2.75v are infrequent (e.g., 10 minutes apart). At the other timings, they occur much more frequently.

 

How about a RMA?

Link to comment
Share on other sites

  • Corsair Employees

Please test the modules one at a time with http://www.memtest.org and I would set the Dim Voltage to 2.8 Volts as well. If you do find one failing then lets get it or them replaced. Please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it!

However; if you get errors with both modules, that would suggest some other problem. And I would try testing the memory in another system to be sure.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...