Jump to content
Corsair Community

Bad Twinx512-3200LL need RMA

Recommended Posts

I have a bad 256-3200LL (one half of a Twinx512-3200LL set) that consistantly generates errors in Memtest-86 v3.1 running on an ASUS P4R800-VM motherboard with an intel P4 2Ghz processor frequency 2000Mhz FSB 400 MHz. BIOS is AMI BIOS 8.00.04.

Memtest shows 448 MB 333Mhz Dual Channel memory at a speed of 1129 MB/sec.


The errors follow the suspect module when I swap the two modules on the MB or when testing the single module alone. Hundreds of errors are generated, a typical one would be at address 6190d78 test 08080808 returned 0c080808 error bits 04000000. No errors are generated when the single good module is tested alone.


I have also tested this memory on an ASUS AZN8X2.0 MB with similar results.


Vendor not available, memory was brand new to me as birthday present.


Please provide RMA. Will I need to return both modules, or just the suspect one?

Link to comment
Share on other sites

  • Corsair Employees

I would suggest you get them both replaced, and with this MB and these modules would would want to run the memory at DDR333 and set the Dim Voltage to 2.7X Volts.

Please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it!

Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  • Create New...