Vinicio Mora Posted May 11, 2005 Share Posted May 11, 2005 I have tried this memory in 3 differents mb (Epox ep-9nda3+, MSI K8MM-ILSR and MSI K7N2 Delta2 Platinum) and got lot of problems. In the K8MM don't post, in the Epox don't boot and with the K7N2 is posible to work only if is used at 333. I tested with memtest in the K7N2 and show some errors. It is time for a RMA? I have use this memory for about 2 years, previosly with a Asus A7N8X deluxe and no problems until I change to the Epox. Link to comment Share on other sites More sharing options...
Wired Posted May 11, 2005 Share Posted May 11, 2005 Place them back in the ASUS, do they still work fine? What is the CPU / FSB in each board? Link to comment Share on other sites More sharing options...
Vinicio Mora Posted May 11, 2005 Author Share Posted May 11, 2005 Place them back in the ASUS, do they still work fine? What is the CPU / FSB in each board? Sorry but now I don't have the Asus. Could be that I ran the Asus at 333 and I don't notice anything wrong? The problems begin when the memory is clocked at 400. Thanks Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted May 11, 2005 Corsair Employees Share Posted May 11, 2005 We can try replacing your modules but what you have posted would suggest some other problem. Please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! Link to comment Share on other sites More sharing options...
Vinicio Mora Posted July 29, 2005 Author Share Posted July 29, 2005 Thank you very much; I have received the replacement memory as you said. But the memory come bad, one module is ok, the other one don’t boot, I tried it in 3 different motherboards. What is the next step I have to do? Please help me I have almost 3 month without my computer. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted July 29, 2005 Corsair Employees Share Posted July 29, 2005 Please either call our customer service at 888-222-4346 and dial "0" or follow the link in my signature "If you have submitted the RMA using the on line form and have not got a reply!" Link to comment Share on other sites More sharing options...
Vinicio Mora Posted July 29, 2005 Author Share Posted July 29, 2005 I don't understand. I send a RMA with this number # R79590 and you send me a replament, but the replacement memory don't work. As I tell you only 1 module boot, the other don't. What I need to do? A new RMA? Please either call our customer service at 888-222-4346 and dial "0" or follow the link in my signature "If you have submitted the RMA using the on line form and have not got a reply!" Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted July 29, 2005 Corsair Employees Share Posted July 29, 2005 Yes, but please talk to our customer service, they will help you sort that out, and since this is a second RMA we will take care of the shipping both ways. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.