Jump to content
Corsair Community

iCue V4 (HydroX/COMMANDER PRO)


kim610
 Share

Recommended Posts

After I updated icue to V4 ,The second COMMANER PRO has no HydroX option.

 

 

COMMANER PRO 1 (LL120 *5 , PUMP XD3)

 

COMMANER PRO 2 (LL120 *4 , PUMP XD5)

 

plz help , What should I do now ?

icue3_1.thumb.png.b055186aa7d961551b6e2c649e2b59fd.png

icue3_2.thumb.png.f3690af9b1b469a0a526be532326c500.png

icue4_1.thumb.png.01855fb05465b4cd982e6c0050d4d0af.png

icue4_2.thumb.png.13c90307f34f84eb656a8191f8b86334.png

Link to comment
Share on other sites

In order to trigger the Hydro X pump profile, the pump must be connected to Commander Pro port #6 -- even if you only have 4 fans. If for whatever reason you still cannot set it, use a manual or custom control profile instead. Performance Tab click the "+". A graph will appear below. You may want your own control curve for pumps anyway. The DDC based XD3 and D5 based XD5 will have very different PWM%= X RPM points and very different noise profiles.

 

The same applies to Hydro X fans and it requires a temp probe in slot #1.

Link to comment
Share on other sites

In order to trigger the Hydro X pump profile, the pump must be connected to Commander Pro port #6 -- even if you only have 4 fans. If for whatever reason you still cannot set it, use a manual or custom control profile instead. Performance Tab click the "+". A graph will appear below. You may want your own control curve for pumps anyway. The DDC based XD3 and D5 based XD5 will have very different PWM%= X RPM points and very different noise profiles.

 

The same applies to Hydro X fans and it requires a temp probe in slot #1.

thank you for your reply!

The Hydro X pump is connected to Commander Pro port 6 and the temperature probe in slot 1.

 

Because I can set it in ICUE V3, there is a problem with V4.

Link to comment
Share on other sites

Try performing a clean uninstall and install of the iCUE software and then re-setup the Commander Pro's for Hydrox.

 

https://help.corsair.com/hc/en-us/articles/360025166712-Perform-a-clean-reinstallation-of-the-Corsair-Utility-Engine-iCUE-

 

thank you for your reply!

 

i already fixed it.

 

Commander Pro 2

Lighting setup--->Select XD5 PUMP & LL FAN---->Cooling(PUMP & FAN options will be displayed )

Link to comment
Share on other sites

 Share

×
×
  • Create New...