Jump to content
Corsair Community

Commander pro issues help!


Alexru30
 Share

Recommended Posts

Anyone familiar with the Icue software from Corsair,I am using a commander pro rgb hub, fans 1 to 3 are 3 pin and 4 and 5 are 4 pin. I can adjust the speed of 4 and 5 which are my aio fans but cannot change the speed of 1 to 3 even with a custom curve. Any ideas as I have read you can mix 3 and 4 pin fans it just has to be configured right?
Link to comment
Share on other sites

There are individual settings for each fan in the Commander Pro Device Settings. the default is auto-detect, but you may wish to manually select 3 pin for 1-3 and 4 pin for the PWM fans on 4 and 5.

 

However, there are several other factors involved including the control curve, sensor choice, and the exact fan model. If the above does not work, these will need to be examined.

Link to comment
Share on other sites

 Share

×
×
  • Create New...