Wildat07 Posted April 23, 2021 Share Posted April 23, 2021 (edited) Recently added some more fans to my 5000D case but was out of Fan and RGB slots on my Commander Core. Got a Commander PRO to expand. I plugged the ML fans into the Core and the RGB into the RGB Fan LED Hub. The LED Hub is plugged into LED 1 on the PRO. On the RGB Fan LED Hub, I plugged them into 1, 2, and 3. Understand it is serial and needs to be in order. In iCUE, I identified the fans as ML and that there were three of them. The second fan is being identified as both 2 and 3. If I change iCUE to 4, the third fan will light up. There is nothing plugged into slot 4. If I try to change it from ML fans to 8-LED Fan Series, something even stranger happens. The fan that was previously 1 is no longer lit. Fan 2 becomes Fan 1. Fan 3 lights up as fan 2. Any advice? Edited April 23, 2021 by Wildat07 Link to comment Share on other sites More sharing options...
Corsair Employees Corsair Notepad Posted April 23, 2021 Corsair Employees Share Posted April 23, 2021 We would recommend that you contact our support team by opening a ticket at https://help.corsair.com Link to comment Share on other sites More sharing options...
Recommended Posts