Jump to content
Corsair Community

Commander pro dont show PWM LL Fans


Preguiça
 Share

Recommended Posts

I'm having problems with my Commander Pro, sometimes my 6 LL Fans don't show up, sometimes some show up, and most of the time nothing appears.

 

I tried to change language, auto, 4-pin, reinstall, firmware update.

 

Does anyone have a solution?

0.thumb.png.5c06406054685bde2659919e2c752b0f.png

2.thumb.png.47d86a2101c7128e6125ae463ce3a0cb.png

6.thumb.png.017d712bb450ebbc72ab3fc2bbf691c7.png

Link to comment
Share on other sites

This usually happens when running another full spectrum monitoring program like AIDA or HWiNFO that polls the Corsair devices at the same time. The mixed up voltages on the 3.3/5/12 volt rails are another classic sign of the software conflict. Quit the other program and restart the CUE service from the settings page or reboot the PC to restart all. Edited by c-attack
Link to comment
Share on other sites

This usually happens when running another full spectrum monitoring program like AIDA or HWiNFO that also polls the Corsair devices at the same time. The mixed up voltages on the 3.3/5/12 volt rails are another classic sign of the software conflict. Quit the other program and restart the CUE service from the settings page or reboot the PC to restart all.

 

 

AMAZING.... Just finished HWMonitor

 

VOILA

66.thumb.png.ca1958b26c2d1c8477879f22e0dfc715.png

Link to comment
Share on other sites

 Share

×
×
  • Create New...