Raceaway Posted April 10, 2021 Share Posted April 10, 2021 Recently, my h100i which I have been using for just about a month now has been randomly disconnecting and reconnecting causing the leds to flash and causes my keyboard to spam a key every so often. I have tried to set the fan control for the aio to voltage and set it to 100% and that has not worked. Any suggestions are welcome. Link to comment Share on other sites More sharing options...
c-attack Posted April 10, 2021 Share Posted April 10, 2021 You may want to look at the current Platinum/XT disconnect thread here. There is an even longer and older one that originated with the X570 MBs, but it appears AMD carried their decisions over the B550 series as well. Most people resolve this by using a powered internal USB hub to make up for the motherboard's irregularities. Link to comment Share on other sites More sharing options...
Raceaway Posted April 10, 2021 Author Share Posted April 10, 2021 Thank you I'll take a look through these. Starting last night it started to flatline and was not responding to anything in icue so I resinstalled the newer version this morning and it seems to be responding once again. Link to comment Share on other sites More sharing options...
c-attack Posted April 10, 2021 Share Posted April 10, 2021 That may be something else. The 'flatlining" is usually the service freezing/locking. Conflict with other RGB or monitoring programs is a possible cause. Or it could have been a regular old glitch and the repair install has corrected it. Link to comment Share on other sites More sharing options...
Raceaway Posted April 11, 2021 Author Share Posted April 11, 2021 Yea. I'm still getting the constant disconnect and reconnecting and flashing rgbs. It is also messing with other devices plugged in via usb like my keyboard or controller when it happens. Link to comment Share on other sites More sharing options...
Vegan Posted April 11, 2021 Share Posted April 11, 2021 The Corsair Commander has 2 power USB ports for devices. I run my H1000i off one and the H115i RGB off the other. Everything works fine. Link to comment Share on other sites More sharing options...
Raceaway Posted April 11, 2021 Author Share Posted April 11, 2021 The Corsair Commander has 2 power USB ports for devices. I run my H1000i off one and the H115i RGB off the other. Everything works fine. I do not currently own a commander pro. I have it plugged into my motherboard currently. Link to comment Share on other sites More sharing options...
Corsair Employee Corsair Travis Posted April 14, 2021 Corsair Employee Share Posted April 14, 2021 Sorry to hear that. Please create a ticket and our support team will look into this further. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now