Jump to content
Corsair Community

Corsair XMS PRO PC4000 1T problem!


Recommended Posts

Hello friends, my names Daniel, I`m from Brazil!

 

My kit dual memory 2x512 XMS PRO PC4000 freeze my Pc at 1T!!

 

My configuration:

A64 3200+ 939 90nm

Epox 9NDA3+

120gb seagate SATA

2x512 corsair XMS PRO PC 4000

 

In any speed it presents problems in 1T.

 

See errors!!

 

http://www.comp.pucpcaldas.br/~al550077551/Imag014.jpg

http://www.comp.pucpcaldas.br/~al550077551/Imag015.jpg

 

12 erros at 54%

 

They help me!

Link to comment
Share on other sites

  • Corsair Employees
Please tell me the exact bios settings you have set for CPU and memory and any performance settings you have set! And I would set the Dim Voltage to 2.8 Volts and test the modules one at a time.
Link to comment
Share on other sites

  • Corsair Employees

LOL!

Please tell me the complete system spec and the complete list of settings you have set in your Bios. Not being able to run at 1T is usually some other problem. And as I said I would suggest testing the modules one at a time. Also Failures on Test 5 or 8 would suggest some other hardware problem other than memory.

Link to comment
Share on other sites

OK!!

 

CPU 3200+

1.6v

Mult 10x

 

Chip

HT 3x

1.75v

 

Mem

3 4 4 8

V 2.8

1T

 

The problem occurs exactly when I place the configurations in default. In any speed it is enough to place 1T so that the problem occurs!

 

Thanks

Link to comment
Share on other sites

Hello!! :confused:

 

I made the tests with the separate memories and he did not present error. When I placed the two together ones I had that to increase the voltage to be able to give the BOOT!

 

I made all the tests with all the possibilities, and I presented error in all!

 

My memories are with problem?

 

It could order for RMA?

 

Please Help me!

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...