Jump to content
Corsair Community

Abit VT 7 motherboard cmx512-32000c2 matched memory


Gmann

Recommended Posts

I can't seem to get this memory to work, when corsair compatibility chart says it will work. I can only get 1 gig to work when I try to put all 4 sticks in i get the dreaded blue screen from windows. I know there is nothing wrong with the mortherboard I have tried all slots and they work. I have a VIA chipset. If you can tell me how to get this to work i would appreaciate it greatly.

 

 

 

Gmann

Link to comment
Share on other sites

  • Corsair Employees

Gman,

I would suggest you watch the DDR basics presentation, as that will help explain this.

However, if the modules will run and pass http://www.memtest.org one or 2 modules at a time then the problem is not with the memory. And with 4 modules depending on your hardware configuration you may need a 450-600 Watt PSU as well as tweak the timings to make the system stable. I would suggest you set the timings to Cass 3-3-3-8 at 2.8 Volts with all four modules.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...