Jump to content
Corsair Community

TWINX1024-3200C2PT / Asus P4C800-E Unable to post


Recommended Posts

I have a set of the TWINX1024-3200C2PT modules running on the Asus P4C800-E Deluxe motherboard with no problems for 4 months, then last night turned on the pc and could not get past bios post.

 

Good thing is I had the same set of memory running on another machine, replaced with that set and was able to boot up no problems. So I decided to try booting with 1 stick at a time, 1 stick would boot up with no problems, but the other would not even post. Got the same results on the other machine, with the bad memory stick. Also ran memtest and was getting errors on that same stick.

 

Specs/settings:

Asus P4C800-E Deluxe - BIOS vs 1021

Intel P4 3.2e Prescott 800MHz FSB

Corsair TWINX1024-3200C2PT DDR400

 

bios settings:

CPU External Frequency: 200

DRAM Frequency: 400

AGP/PCI Frequency: Auto

CPU Core Voltage: Auto

DDR Reference Voltage: 2.75V

AGP VDDQ Voltage: 1.5V

Performance Mode: Turbo

DRAM CAS# Latency: 2

DRAM RAS# Precharge: 3

DRAM RAS# to CAS#Delay: 3

DRAM Precharge Delay: 6

DRAM Burst Length: 4

Performance Acceleration Mode: Enabled

DRAM Idle Timer: Auto

DRAM Refresh Rate: Auto

USB Legacy support: Disabled

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...