Jump to content
Corsair Community

Corsair CMX512-2700C2


Pvtpilot

Recommended Posts

Hello,

 

Hope someone can help. I currently have a 512 stick of CMX512-2700C2 and the sticker says version 1.3. Today I went and bought another exact stick from Fry's. Once I got home, the computer would not boot up. Upon looking at the 2 sticks, I noticed the new stick says version 2.1.

My question is; Does the version number matter? Is there anyway to get them to play nice together?

I am running (or trying to) on a ASUS P4PE and a P4 2.53.

 

Thanks for the help.

 

Scott

Link to comment
Share on other sites

Ok I ran the memtest on each stick. I ran each one for almost an hour and just over 3 compelte passes. No errors were indicated on either stick. Any help would be most appreciated.

 

Thanks Scott

Link to comment
Share on other sites

  • Corsair Employees

Please try and set the Dim Voltage to 2.7X Volts and install the modules in slots 1-3 and set the timings manually to the following.

Dim Voltage to 2.7 Volts

Resulting Frequency: 166MHz

SDRAM CAS Latency: 2.5T

SDRAM RAS to CAS Delay (tRCD): 3T

SDRAM Row Precharge (tRP): 3T

SDRAM Active to Precharge Delay (tRAS): 7T

Link to comment
Share on other sites

I have been called out. I will have to try to change these settings tomorrow. I appreciate the help and will post back on here when I complete the changes with the results. Thanks again

 

Scott

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...