epc-shadow Posted March 1, 2021 Share Posted March 1, 2021 Hello, I Am hoping i can get some help and support on an issue i am faced with. Specs: BeQuiet 900 R2 pro Case Asus ROG Hero 8 X570 - EK MonoBlock Ryzen 5800X - EK MonoBlock 32GB 3600 Dominator Pro EVGA 2070 - EK WaterBlock with backplate X2 2TB Samsung EVO SN850 NVME HX750i PSU 1x LL140 - Seems OK 3x LL120 - One is OK two are "Iffy" 3x QL140 (brand new and OK, Bought 4 but using 3 as the existing LL is OK) 3x RGB Strip & 5x RGB Strip 2x Commander Pro - only using 1 but bought second thinking it will fix my issues AND allow my 7th fan to work in iCue. Issues- when i first built the PC everything was fine, and all RGB was working ok, but it slowly started to have issues with some rans not addressing correctly and then RGB began to flicker until a point where they just didnt light up. Fans would always work and RPM in iCue all ok. My issues are solely RGB Related and i think now i am left with faulty LL120 Fans - perhaps that has been the issue from day 1, not sure. Can anyone help advise on my connection diagram, Can i use a PWM Y Cable and remove the 2nd Commander pro? Commander Pro 1: USB TO MB Header USB TO RWF0040 USB TO RW0019 3PIN RGB to RGB HUB 2X LL120 1X LL140 3X QL140 No Temp atm. Commander Pro 2: Not connected up RWF0040: 3X QL140 RW0019: 1- 3X RGB Strip 2- 5X RGB Strip RGB HUB: 3x LL120 1x LL140 Link to comment Share on other sites More sharing options...
epc-shadow Posted March 1, 2021 Author Share Posted March 1, 2021 Image for ref It is also worth noting that in iCue i only see Lighting Channel 1 and 2 under Lighting setup - i presume this is my Node Pro / RWF0019?* Link to comment Share on other sites More sharing options...
Recommended Posts