Jump to content
Corsair Community

Fans colors are really weird


Ariss
 Share

Recommended Posts

Hi again!

 

So i bought 6 LL120 fans from a friend. He said that they are spinning fine but the colors are not responding to the software. So i tested some and indeed, They spin good but the colors are really weird. When i first select rainbow they run rainbow, But when i do a static color like red afterwards, You see partly red and the rest is still rainbow and so on! I think they might be corrupt but all six of them? I attached some photos where you can see the weird colors.

 

Any help?

563898856_WhatsAppImage2021-02-28at18_50_47.thumb.jpeg.58263e1d6a4ebb87a0ee7688ad90b7dc.jpeg

1725234048_WhatsAppImage2021-02-28at18_50.46(1).thumb.jpeg.fc5daa7e86793b40759a88782ded1e15.jpeg

1699019957_WhatsAppImage2021-02-28at18_50_46.thumb.jpeg.ce17bf3e7abc7f20cc866b4c77b605fd.jpeg

1131040025_WhatsAppImage2021-02-28at18_50_45.thumb.jpeg.2e5a671af26b0f82938f00b3b07b66a7.jpeg

Link to comment
Share on other sites

  • Corsair Employees

Hi Ariss,

 

Try hooking up each LL fan to slot 1 on the LED Hub.

If this doesn't cause any unusual behaviour, leave one fan on slot 1 and test the remaining fans on slot 2

Repeat on further slots until you run out of fans - but always make sure to fill up the slots in order (starting from 1) as they are wired in series.

This will highlight if a fan, or the LED Hub is at fault; isolating where the fault is located if the hub is at fault.

Link to comment
Share on other sites

Hi Ariss,

 

Try hooking up each LL fan to slot 1 on the LED Hub.

If this doesn't cause any unusual behaviour, leave one fan on slot 1 and test the remaining fans on slot 2

Repeat on further slots until you run out of fans - but always make sure to fill up the slots in order (starting from 1) as they are wired in series.

This will highlight if a fan, or the LED Hub is at fault; isolating where the fault is located if the hub is at fault.

 

 

Thanks for your reply!

 

So I tested every fan on fan slot 1 and some were working at the beginning but afterwards when i switched to red and then to white, they were partly white and partly red. and some were even flickering. Some were only lightning up half and other showed random colors.

 

When i tested other fans on the LED hub they were working fine so i don't think its the hub.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...