Jump to content
Corsair Community

cant change fan curve to GPU temp in icue, only gives H115i Cappelix Temp as option


Keltik
 Share

Recommended Posts

Hi Guys,

 

I upgraded to the H115i elite capellix, only issue i am having is when i adjust my fan curves i cannot change the fan curves to the GPU temperature sensor?

 

My case has a separate chamber for the GPU and now the fans are curving based on the H115i Capellix fluid temperature.

 

you can see in the picture i have no options for sensors in the drop down?

Capture.PNG.d29ac4cd04a55c161d3fd46a8c9d7bd0.PNG

Link to comment
Share on other sites

If you create a second custom curve, will it allow you to change the sensor choice?

 

Unrelated: That is a very steep graph for coolant temp. +1C coolant = +1C to the CPU, so 2-3C increase doesn't affect your performance unless you are right again your maximum limit. On the other hand, your room or case temp can shift 3C in a few minutes and that is going to cause a lot of unnecessary fan speed shifts.

 

I got one of the box and jacked in the back. I am getting full sensor choice (like the Commander Pro) with everything from MB sensor to RAM to HDD temps, etc. Try running a repair install of CUE from the Window Settings -> Apps list. Click on Corsair iCUE and select Modify. Follow the prompts for the repair install. If still nothing, reboot the PC. The Commander Core is bit funny sometimes with detection and needs a power cycle.

Edited by c-attack
Link to comment
Share on other sites

Another possibility is if you are running AIDA, HWiNFO, or another full spectrum monitoring program that is polling the Commander Core, it has the tendency to lock up both data and certain elements of the UI (performance tab disappears, etc). I have not seen this specific one, but there is some element of randomness.
Link to comment
Share on other sites

 Share

×
×
  • Create New...