Jump to content
Corsair Community

ICUE Light node core detects 1 fan not 4


Omnibus
 Share

Recommended Posts

Just installed an AX1600i, Commander Pro, Lighting node core, and Capellix, but for some reason I can't turn on (lighting) the 3 QL fans connected on the node core. The fans power comes through the commander pro (node is usb connected to the commander pro), but the rgb is connected to the node. Fans run but not lighting. I have another QL fan connected in slot one and works (lighting) so tried plugging in the other 3 fans and they do light up in slot one, but not in 2-6.:confused::confused::confused:
Link to comment
Share on other sites

  • Corsair Employees

Make sure you have configured the Lighting Node Core in the ICUE software to control QL RGB Series fans and the correct number of fans. ALso make sure that the RGB connections to the Lighting Node core go in numerical order starting with port 1. If you have a break in those ports they will not work. Also if you have a different type of RGB fan installed in the first port on the Lighting Node Core the RGB of the QL fans after will not work correctly either.

 

You should also refer to Zotty's guide that is pinned to the top of this forum.

Link to comment
Share on other sites

 Share

×
×
  • Create New...