k70 rgb K70 rgb mk2 lp

[Redphyve]

Hi

 

Is there anyone who can tell me the correct way to reset a K70 RGB MK2 LP to factory defaults? These instructions below are on the FAQ. none of them work.

 

My issue is that with some games I play, the keys seems to stick and in I turn left, release the key but my character or car keeps on turning left, ir I run and when I stop, my character will keep on running for a few seconds.

 

f you have a K95 RGB Platinum or any MK2 keyboards:

 

Unplug the keyboard.

With the keyboard unplugged, hold down the ESC key.

While holding down the ESC key, plug the keyboard back into the computer.

Keep holding the ESC key until the keyboard begins to flash.

Unplug the keyboard again, then plug it back in.

 

For all other keyboards:

 

Unplug your keyboard.

With the keyboard unplugged, hold down the ESC key.

While holding down the ESC key, plug the keyboard back into your computer.

After about 5 seconds, release the ESC key. You will see the keyboard lighting flash if the reset is successful.

 

I've already rma'd the board and I still have the same issue.

 

Thanks

 

Red

[Corsair Blade]

Hello Redphyve,

 

First, we sincerely apologize for any delay you experienced due to extraordinary holiday support/service request volume.

 

Those are correct instructions for a factory reset. The next step would be a firmware flash, though this sounds like it isn't an issue with the actual keyboard, if the exact same issue is happening on two different units.

 

Please open up a ticket with support using the link above for instructions on how to perform a firmware flash on your k70 RGB mk.2 LP