TheBanana Posted January 3, 2021 Share Posted January 3, 2021 Hi, I have a Commander Pro with 6 SP RBG Series Fans connected, all controlled from the iCUE. I have had this for just over 2 years and in that time, everything has worked fine. Yesterday I noticed that 3 of the fans are not showing any lights. The Commander pro is successfully controlling all 6 fan's speeds. The Commander pro is successfully changing the lighting for the fans connected to the commander pro lighting node on 1 2 and 3. The problem I am having is that the fans connected to the commander pro lighting node on 4 5 and 6 are not controlling any of the lights. I can confirm that the both lighting channels (Lighting Channel 1 and Lighting Channel 2) are correctly set up (with SP RGB Series Fans selected with 3 fans each). I have tested the 3 fans on lighting node on 4 5 and 6 (that are not working) on lighting node on 1 2 and 3 (to ones that are working) and I can confirm the fans themselves seem to be functioning fine. I would appreciate any advice! Do I need to buy a new commander pro? Or is there a fix that I am missing? Thank you! :-) P.S All firmwares are up to date. Link to comment Share on other sites More sharing options...
TheBanana Posted January 6, 2021 Author Share Posted January 6, 2021 SOLVED. The solution was to assign all six case fans to Lighting Channel 1. Link to comment Share on other sites More sharing options...
Recommended Posts