TheBanana Posted January 3, 2021 Share Posted January 3, 2021 Hi, I have a Commander Pro with 6 SP RBG Series Fans connected, all controlled from the iCUE. I have had this for just over 2 years and in that time, everything has worked fine. Yesterday I noticed that 3 of the fans are not showing any lights. The Commander pro is successfully controlling all 6 fan's speeds. The Commander pro is successfully changing the lighting for the fans connected to the commander pro lighting node on 1 2 and 3. The problem I am having is that the fans connected to the commander pro lighting node on 4 5 and 6 are not controlling any of the lights. I can confirm that the both lighting channels (Lighting Channel 1 and Lighting Channel 2) are correctly set up (with SP RGB Series Fans selected with 3 fans each). I have tested the 3 fans on lighting node on 4 5 and 6 (that are not working) on lighting node on 1 2 and 3 (to ones that are working) and I can confirm the fans themselves seem to be functioning fine. I would appreciate any advice! Do I need to buy a new commander pro? Or is there a fix that I am missing? Thank you! :-) P.S All firmwares are up to date. Link to comment Share on other sites More sharing options...
Recommended Posts