Hydro Series H115i PRO with RGB fans

[bwop]

Hello everyone,

This is my first post so I'm sorry if this is not the right location for it. I was curious if it is at all possible to add RGB fans to an AIO that did not come with them originally. I would be looking to add Corsair ML140 PRO to my H115i pro AIO, but am unsure if this is possible. Any help would be much appreciated as I am still relatively new to PC building.

 

Thank you in advance.

[c-attack]

Of course. It's like adding RGB fans to any part of the case. The lighting power is supplied via a separate controller/hub that is included in most multipacks. You will want to get the ML140 RGB "twin pack" or "dual pack". That will have the Lighting Node Pro and RGB hub inside. That device will work for up to 6 RGB fans, so you will be able to add more later if desired.

[bwop]

Thank you for helping me. I assumed it would be something like that, the only question I have is, are the fans and pump still going to sync together, since I assume I will be plugging the fans into the lighting node and into the AIO rig. Sorry if this is really basic stuff, like I said I'm rather new and just don't want to create more issues for myself.

[Rakharo]

Would you help im sorting out: 

Better AIO or Better fans on the Same AIO listed in this thread- 3 year old system substantially getting good temps on the fans, but need a couple less noisy fans at the 600 rpms needed to sustain 40c cpu and under with 33celcius water idle. Keeping the system pump or fan is my issue both perform but im thinking it gets aggitation in the kit on the aio radiator Fan blade area. 

fan replacements are on Newegg.com /marketplace ads for cheap, rather the two range for 80.00 shipped, or 40-50.00 like new shipped. 

#1 ML140 LED ELITE - 
0.30 – 2.06 mm-H2O //  Fan static pressure
400 – 1600 RPM ±10% //  Speed 
15 – 82.9 CFM // fan airflow
10 – 31.8 dBA // Sound level 
5 years
25mm x140mm 
#2 ML140 PRO (ML140 LED ELITE) is designed for quiet operation, with a noise level of 10–31.8 dBA and speeds from 400–1600 RPM.
read if true:
97CFM 
35Decibels /Noise or sound level 
It uses magnetic levitation bearings for low friction and reduced noise, making it a great choice for quiet cooling.

#3 iCUE ML140 RGB ELITE Premium 140mm PWM Magnetic Levitation Fan 
MM - H20 look for that number on your current fans tech specs! and the general model 
Order them as a kit  
Replacement fans 140 
Thickness Same as original 25-30mm 
High static pressure 
Four pin connector 

Some of these types were back in 2022 or prior release of this product 2021 and earlier, Corsair makes the AIO  H115i ELITE CAPELLIX XT AF elite fans Which have the high airflow i was trying to achieve but i need the ml140s cause it plugs in to the dual header adapter on the icue provided plug in no controllers such as  H115i ELITE CAPELLIX XT..