SSSlippy Posted April 30, 2005 Share Posted April 30, 2005 I have 4 sticks of CORSAIR ValueSelect 1GB (2 x 512MB) 184-Pin DDR SDRAM DDR 400 (PC 3200) Dual Channel Kit System Memory Model VS1GBKIT400 Motherboard p4p800 deluxe I get blue screens with physical memory dumps. Also the ram fails the microsoft memory test. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted May 2, 2005 Corsair Employees Share Posted May 2, 2005 Please make sure that you have the latest bios and then load setup defaults and set the Dim Voltage to 2.75 Volts and test the modules one at a time with http://www.memtest.org and please disable legacy USB when running any memory test. Link to comment Share on other sites More sharing options...
SSSlippy Posted May 5, 2005 Author Share Posted May 5, 2005 Please make sure that you have the latest bios and then load setup defaults and set the Dim Voltage to 2.75 Volts and test the modules one at a time with http://www.memtest.org and please disable legacy USB when running any memory test. I have removed 2 sticks of ram and the system has become stable. Im currently running the latest drivers and bios with default settings. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted May 5, 2005 Corsair Employees Share Posted May 5, 2005 Like I said please test the modules one at a time to make sure one is not failing. If all pass one up then that would suggest a power problem, and either your PSU is not big enough or the MB has some power issue. But with 4 modules I would set the Dim Voltage to 2.85 Volts. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.