richie1 Posted April 30, 2005 Share Posted April 30, 2005 I've got two 512MB modules (TwinX1024-3200LLPT) which have been fantastic for about 18 months, but now Windows has become less stable than usual - many page_faults_in_non_paged_area sort of blue screens. I turned of quick boot in the bios to re-enable the memory checker and frequently (but not always) it stops around 415MB beeps a few times and continues. Memtest doesn't seem to want to create a floppy ("the system cannot execute the specified program"), but when I run Microsofts memory tester in fails the first four tests and hangs running the wmats test. Any suggestions? Rich London, UK Link to comment Share on other sites More sharing options...
richie1 Posted May 2, 2005 Author Share Posted May 2, 2005 As an addition, from the BIOS DRAM is configured via SPD giving CAS Latency 2 RAS Precharge 4 RAS/CAS Delay 4 Precharge Delay 6 Burst Length 8 DRAM Integrity Mode is OFF Rich Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted May 2, 2005 Corsair Employees Share Posted May 2, 2005 Can you tell me the make and model of MB you have along with the CPU speed and it’s FSB as well? In addition, please tell me the bios settings you have set for both CPU and memory and any performance settings that you may have set? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.