stevenk Posted December 27, 2020 Share Posted December 27, 2020 (edited) Hello. I have four 120mm Corsair QL fans in the front of my case. The RGB connectors are plugged into a Lighting Node Core. The fan connectors are plugged into a Commander Pro. The USB connector of that Lighting Node Core is plugged into the Commander Pro. I also have an H150i Elite Capellix. The fan and RGB connectors of the Capellix are plugged into a Commander Core. The USB connector of the Commander Core is plugged into the Commander Pro. The USB connector of the Commander Pro is plugged into a header on my motherboard. Unfortunately, when iCue runs, the lighting effects of at least one of the fans is glitched out when in Rainbow Wave mode or the inverse static color when set to a static color. For example, three fans are red and the other is green or three fans are green and one is blue. I tried swapping the RGB connectors many times. Currently, three fans are affected. I have an Asus motherboard and an MSI graphics card, but Asus Armoury Crate and MSI Dragon Center are currently not installed. This is a fresh install of Windows. Logitech Gaming Software is installed, but not set to start with Windows. Also, Aurora is installed. Thank you in advance. Edit: I found the issue. I plugged in the RGB connectors one by one. The RGB connector for the first fan from the top went into Connector 1, the RGB connector for the second fan from the top went into Connector 2, etc. The fourth fan from the top was causing the issue, so I swapped RGB connectors 3 and 4. Now, when I make all fans red, they're all red except for some blue in the back of the third fan from the top, which now has its RGB connector placed in Connector 4. At some point in time, I'll be replacing the third fan from the top. Edit 2: Also, the same spot on the third fan from the top glitches when using the Rainbow Wave preset. Edited December 28, 2020 by stevenk Figured out the problem Link to comment Share on other sites More sharing options...
Corsair Employees Corsair Notepad Posted December 29, 2020 Corsair Employees Share Posted December 29, 2020 You will need to contact our support team by opening a ticket at https://help.corsair.com and they will be happy to assist with your issue. Link to comment Share on other sites More sharing options...
Recommended Posts