Jump to content
Corsair Community

lighting node core and ML pro fan issue


RippinReaper
 Share

Recommended Posts

Hi, I have the node core that came with my 4000x case and I verified I have the front 3 fans in ports 1, 2, 3. .... 4,5,6 are empty.

 

The icue software has the correct fans selected but it thinks that fan 2 is merged with fan 1. yellow(2) and red(1). And it will not show fan 3. The attached photo will help understand. Is the Node Core not working or do I need to change something in the software? Thanks

1727602801_casefans.thumb.PNG.847e1b350c37974da44814085728bac9.PNG

Link to comment
Share on other sites

The LEDs work in series, so if something goes wrong on fan #2, it will affect all the LEDs that come after. Try each fan 1 at a time in slot 1 to make sure they all light up. Try something like white on color that forces all three LEDs on.

 

If all three fans check out on slot 1, put them back in order 1-2-3. If 2-3 is still a mess, it could be the Node Core itself. Swap 1-2 and see if things change. If it is all the same, there is a problem with the Core.

Link to comment
Share on other sites

If all three fans check out on slot 1, put them back in order 1-2-3. If 2-3 is still a mess, it could be the Node Core itself. Swap 1-2 and see if things change. If it is all the same, there is a problem with the Core.

 

Thank you. I put all fans in port 1 and they all lit up white (all 4 led's on each fan). Switched it back and this is what it did again (attached). So the node core must be faulty... Damn

fans.thumb.PNG.19b7cc6958d80d1b60b1bd8334a5f893.PNG

Link to comment
Share on other sites

 Share

×
×
  • Create New...