Papi Flan Posted December 24, 2020 Share Posted December 24, 2020 Background information: Corsair 570X case 6 LL120 fans 4x8 GB Vengence Pro 4000MHZ H100i Elite AIO cooler msi mpg x570 gaming edge I recently purchased 6 LL120 RGB fans and had the desire of installing all the fans and controlling them all on the iCue software. I succeeded, but in the event of swapping the SP120s for the LL120s, I had to use the Commander Core instead of the RGB Hub and the SP lighting controller that came with the 570X case. After swapping hubs, my CPU cooler makes a constant whirring noise on quiet mode. This sound was never present when I ran the setup with the SP120s and the RGB hub instead of the LL120s and the CoCore. Wiring info: CPU cooler is in CPU_FAN All fans including the lighting cables are on the Commander Core. The RGB hub is not being use as well as the SP lighting controller but they are still installed, but I feel as though that would not contribute to the CPU cooler being loud. Everything works and looks fine, its just the CPU cooler whirring louder than before. Any help would be greatly appreciated. Link to comment Share on other sites More sharing options...
Corsair Employees Corsair Notepad Posted December 24, 2020 Corsair Employees Share Posted December 24, 2020 Your question would best be directed to the Cooling section of the forums this is purely for iCUE Software discussion. https://forum.corsair.com/v3/forumdisplay.php?f=155 Link to comment Share on other sites More sharing options...
Recommended Posts