Ludwig vuitton Posted December 23, 2020 Share Posted December 23, 2020 Hello guys! Need help with a QL120 fan. So I just built my first Gaming rig yesterday. Did my first start up and one of my fans LED is not working. Tried switching the rgb pins from the node core and still nothing. Tried using the iCue still no light from the blades. Link to comment Share on other sites More sharing options...
c-attack Posted December 23, 2020 Share Posted December 23, 2020 Make sure you have correctly configured the lighting channel for the fan type and number of fan. Lighting Set-up -> QL x # of fans. That sets the total number of LEDs for the set. Assuming that is correct, the lighting works in series so if fan #2 has a bad spot, usually things don't work right after that. Take the dark fan and plug it into port #1 on the Lighting Node Core. If it does not light up, you have a bad fan. If it does, you need to methodically check each fan in #1 to find the bad one. If none, start building out again 1-2-3-4... until the problem appears. It is possible the Lighting Node Core is also the problem, but we don't see a lot of that on the LNC. Link to comment Share on other sites More sharing options...
Recommended Posts